วันอังคารที่ 27 ธันวาคม พ.ศ. 2554

DEWALT D55141FNBN 16-Gauge Finish Nailer/18-Gauge Brad Nailer

Product Description


Dewalt D55141fnbn 16 Gauge Finish Nailer18 Gauge Brad , Porter Cable Fc350a Clipped Head 2 Inch To 3 12 Inch Framing , Factory Rec Diti Ed Bostitch Un62fnk 2 1 To 2 12 Inch , Hitachi Nt65ma2 15 Gauge 1 14 Inch To 2 12 Inch Angled , Senco Finishpro 42xp 15 Gauge 1 14 Inch To 2 12 Inch Finish , Product Description With a heavy-duty 16-gauge finish nailer, an 18-gauge brad nailer, an oil-free compressor, and all the fittings you need to get set-up, this kit from DeWalt makes it easy tackle a wide range of finish carpentry and woodworking tasks, from crafting custom furniture to securing molding in place. The 18-gauge nailer can handle up to 100 straight collated nails that are 1/2-inch to 1-1/4 inches long at a time, while the 16-gauge nailer can handle up to 160 straight collated nails that are 1-1/4 to 2-1/2 inches long at a time. Each of these nailers also offers tool-free jam clearing, so a bent or damaged fastener never brings work to a standstill for long, convenient 360-degree exhaust, a unique vertical slide that allows you to select depth settings quickly and without any special tools, an over-molded no-mar pad that grips material for accurate toe nailing and protects your work surface, and a trigger lock for improved safety. Each well-balanced nailer also employs a reversible belt hook that provides convenience for both right- and left-handed users.
Featuring a two-gallon tank and the ability to deliver 2.0 SCFM at 90 PSI and a maximum of 150 PSI, the compressor included in this kit is powerful enough to run both of these nailers at the same time, with dual quick couplers to make set up easy. And at just 79dBA, it is surprisingly quiet. You can count on its durability with details like an oil-free, long-life pump, which ensures smooth, maintenance-free operation that never results in oil spilled on sensitive work surfaces, a high-flow regulator, an easy-to-use ball valve drain, and a thoughtful roll-cage design that prevents damage to critical compressor parts. At just 30 pounds and 10.5 inches wide with a convenient cord-wrap feature, this compact unit is easy to move around the jobsite and to store.
[[ Get More Full Details Information ]]

This review is from: DEWALT D55141FNBN 16-Gauge Finish Nailer/18-Gauge Brad Nailer/Compressor Combo Kit (Tools & Home Improvement)
This is my first air compressor but I have had the privilege of using many different portable air compressors (most of them Porter Cable) and this is my favorite. I originally bought this set with general carpentry projects in mind, and I am very glad I did.

Air Compressor Pros:
1. Fills quickly.
2. 2 hose connections are very helpful
3. Metal plate on top protects the motor.
4. Stands up on back for storage so it takes up less floor space.
5. My favorite drain valve I have ever seen on any compressor.
6. Easy to carry.
7. Good placement of power switch on the back.


Air Compressor Cons:
1. 2 Gallon air tank does not allow for much storage.
2. CFM rate is not high enough to use a spray gun for more than short bursts.

Nail Gun Pros:
1. Both nail guns have easy built in safety locks above the triggers.
2. Biggest finish nailer I have ever seen come in an air compressor set.
3. Finish nailer has a good belt clip.
4. The finish nailer once got pulled off my belt and fell onto concrete pavers and did not get a single scratch.

Nail Gun Cons:
1. When you first get the guns they do not come with the hose connectors installed. (They do come with the connectors and Teflon tape but you must put them in.) To protect the guns from any particles falling into them, the guns come with plastic inserts which are almost impossible to remove.
2. The trigger bump on the brad nailer gets jammed in the upright position sometimes.

Accessories:
It came with two accessories I was not aware of at the time of purchase. A single bag big enough for both nailers, the 25' hose included, gun oil, and boxes of nails. It also came with very cheep feeling safety goggles, DPG54M-1D. It did NOT come with gun oil, so to my surprise I had to make a quick trip to the local home depot and buy a $2ish bottle of oil. Also included are the 25' air hose and a bump action trigger (Which I have not used yet).

Other Notes:
1. As you should realize, this kit does NOT come with a staple gun. That can be problematic in some furniture building, especially when applying lewan backing.
2. I bought a 50' hose so I could have two tools attached at the same time and it really comes in handy.
3. You will also want an air gun. They are great for cleaning off sawdust. Also, as I discovered in PC support at school, the air guns are great for cleaning out 8 years of dust from computers.

ไม่มีความคิดเห็น:

แสดงความคิดเห็น